64 Operating Manual BX900S2
Hardware installation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2012 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13569-001.fm
5.4.1 Using cable ties
If you wish, you can secure the power cable with a cable tie to prevent the C19
connector from being pulled out of the server accidentally. The cable tie is
included in the accessories pack that is delivered together with the server.
Figure 13: Using cable ties
Ê Route the cable through the loop of the cable tie.
Ê Pull the cable tie tight to secure the power cable.
The insulated connector cannot now be disconnected from the server
accidentally.
I You can undo the cable tie by bending back the zip strip at the fastening
point (1).
1
To Next Page
Loading...
