Fujitsu Primergy BX900 S2 - Connection Blade DCB SW 10 Gb 18;6+6

88 Operating Manual BX900S2
Starting up and operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2012 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-13570-001.fm
6.1.3.8 Connection Blade DCB SW 10Gb 18/6+6
Figure 29: Connection Blade DCB SW 10Gb 18/6+6
A External 10 Gb Ethernet ports (6x)
Ports for Brocade branded Ethernet SFP+ 10 Gbit/s modules or SFP+ Twinax cables
B External 8 Gb FC ports (6x)
Ports for Brocade branded FC SFP+ 8Gbit/s modules or SFP 4Gbit/s modules
1 Status indicators for external Ethernet ports (green/orange)
Dark: No signal carrier
Lights up green: Link is established and port is active. Online is normal, but no
port activity.
Flickers green: Port online, data transport
Flashes green: – Slow: Port online, but segmented
– Fast: Internal loop
Lights up orange: Port with no sync (light or signal carrier issue)
Flashes orange: Slow (~ 2 sec. interval): Port deactivated.
Fast (~ 0.5 sec. interval): Port defective
2 Status indicators for external FC ports (green/orange)
Dark: No signal carrier
Lit green: Link is established and port is active. Online is normal, but no
port activity.
Flickers green: Port online, data transport
Flashes green: – Slow: Port online, but segmented
– Fast: Internal loop
Lights up orange: Port with no sync (light or signal carrier issue)
Flashes orange: Slow (~ 2 sec. interval): Port deactivated.
Fast (~ 0.5 sec. interval): Port defective
1
3456
AB
2