Fujitsu PRIMERGY BX900 - Chapter 4 Operating the Embedded Switch Module; In this Chapter; Interoperability

Brocade 5450 Hardware Reference Manual 33
53-1001266-02
Chapter
4
Operating the Embedded Switch Module
In this chapter
•Interoperability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
•Accessing the Embedded Switch Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•Interpreting POST results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•Diagnostic tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
•Interpreting LED activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
•Rebooting the Embedded Switch Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
•Removing and replacing the Embedded Switch Module . . . . . . . . . . . . . . . 38
•Locating the Embedded Switch Module serial number . . . . . . . . . . . . . . . . 38
•Removing and replacing an SFP transceiver . . . . . . . . . . . . . . . . . . . . . . . . . 39
Interoperability
The Embedded Switch Module supports interoperability for the following functions:
• Link initialization
• Principle Embedded Switch Module selection
• Routing (FSPF)
• Simple Name Service
• State change notification
• Soft WWN zoning
• SNMP facilities
• Translative mode (private target support on fabrics)
• Trunking (between two Brocade switches)
• Advanced Performance Monitoring