Fujitsu PRIMERGY BX900 - Regulatory Compliance; FCC Warning (US Only); KCC Statement (Republic of Korea)

Brocade 5450 Hardware Reference Manual 45
53-1001266-02
Regulatory compliance
A
Regulatory compliance
This section describes the regulatory compliance requirements for the Embedded Switch Module.
It contains:
• “FCC warning (US only),” next
• “KCC Statement (Republic of Korea)” on page 45
• “VCCI statement (Japan)” on page 46
• “Power cords (Japan Denan)” on page 46
• “BSMI statement (Taiwan)” on page 46
• “CE statement” on page 47
• “Canadian requirements” on page 47
• “Laser compliance” on page 47
• “RTC battery” on page 47
• “Electrical safety (if applicable)” on page 48
• “China RoHS” on page 48
• “Regulatory certifications” on page 51
FCC warning (US only)
This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, might cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user’s own
expense.
KCC Statement (Republic of Korea)