RX300 S3 Options Guide 45
ROMB (RAID on Motherboard) Installing the ROMB upgrade kit
Ê Press the holders on either side of the mounting location outward.
Figure 25: iButton und Cache Modul einsetzen
Ê Insert the cache module.
Ê Press the cache module downward until the holders on either side of the
mounting location are engaged.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion” on page 101.
I Information on the configuration is provided in the Technical Manual for
the system board.
To Next Page
Loading...
