60 Options Guide RX300 S3
Tape drive Accessible drives
Ê Connect the IDE cable to the drive (see also chapter “Appendix” on
page 105)
Figure 43: Pushing the CD/DVD drive into the bay
Ê Push the drive into the bay completely.
Ê Reinstall the cover again.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion” on page 101.
8.4 Tape drive
I The Installtion of a tape drive ist only possible for the 3,5“ HDD version.
Ê Open the server as described in the chapter “Preparation” on page 21.
Ê Remove the cover (see “Removing cover” on page 48).
To Next Page
Loading...
