RX300 S3 Options Guide 83
11 Parallel interface
V CAUTION!
Observe the safety instructions in the chapter “Safety notes” on page 15.
11.1 Installing a parallel interface
Ê Open the server as described in the chapter “Preparation” on page 21.
I For standard configuration the parallel interface is to install into a low-
profile slot cover. If the optional riser board is used, a standard slot cover
is necessary.
Parallel interface in standard configuration
Figure 67: external parallel interface with low-profile slot cover
Ê Remove slot cover 5 ( see “Remove the slot cover” on page 66)
To Next Page
Loading...
