50 Options Guide RX300 S3
Installing a FD drive Accessible drives
V CAUTION!
Keep the dummy module for future use. If you remove the FD drive
again and do not replace it with a new one, the dummy module must
be reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire protection measures.
Installing FD drive
Figure 29: Insert FD drive into the mounting frame.
I The mouning frame and the cable is deliverd in the accessory pack with
the PRIMERGY RX300 S2.
Ê Insert the FD drive into the mounting frame. Regard the plastic pins. They fix
the dive in the frame.
To Next Page
Loading...
