Fujitsu PRIMERGY RX300 S5 - Important information; Safety instructions

RX300 S5 Service Supplement 27
Replacement routines Replacing the fan box backplane
4.4 Replacing the fan box backplane
Ê Open the server as described in the section “Opening the server” on
page 17.
Ê Remove the fan box (Description see Options Guide PRIMERGY RX300 S5
in chapter „Preparation“).
Ê Remove all fans.
Ê Turn the fan box.
Figure 11: Removing the screw of the fan box
Ê Remove the screw.