52 Service Supplement RX300 S5
Replacing the UFM board Replacement routines
4.10 Replacing the UFM board
Ê Open the server as described in section “Preparation” on page 17.
Ê Remove the PSU cage as described in section “Replacing PSU riser card”
on page 29.
Figure 40: Removing the UFM board
Ê Remove the nylon screw on the defective UFM board (1).
Ê Disconnect and remove the defective UFM board (2).
The UFM spacer remains on the system board.
2
1
To Next Page
Loading...
