Fujitsu PRIMERGY RX300 S5 - Page 32

32 Service Supplement RX300 S5
Replacing PSU riser card Replacement routines
Figure 18: SV-Riserkarten-Halterung montieren
Ê Reinstall the PSU riser card bracket (1) and secure with one screw (M3 x 6
mm) (2).
Ê Insert the PSU box into the server . (Description see Options Guide
PRIMERGY RX300 S5 in the capter „completion“).
Ê Close the server and connect the power connectors (Description see
Options Guide PRIMERGY RX300 S5 in the capter „completion“).
2
1