RX300 S5 Service Supplement 7
Introduction Overview of the documentation
I For some components only the installation routine is described in the
Options Guide. Removing these components proceed in reverse order.
Extensions and upgrades
– Removing the airduct
– Removing the fanbox
– Extending/replacing the main memory
– Installing a second processor / replacing the
processor / replacing the heat sink
– Installing accessible drives
– Installing a Local View module
– Installing a PCI controller
– Installing a battery for the PCI controller
– Installing UFM
– Installing TPM
– Installing Front VGA
Options Guide
Cabling
Replacement routines:
– Replacing the operating panel
– Replacing the USB module
– Replacing the backplane
– Replacing the SAS backplane
– Replacing the IDTEMP Combo
– Replacing the fan box backplane
– Replacing the system board
– Replacing the TPM
– Replacing the UFM
Service Supplement
Settings and Board layouts
BIOS setup BIOS Setup
Information/procedure Manual
Table 1: Overview of the documentation PRIMERGY RX300 S5
To Next Page
Loading...
