4. Open the ADF paper chute (cover) of the ScanSnap.
Example: iX1600
a For iX1600/iX1500, the touch panel is activated.
For iX1400, the [Scan] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
In addition, the ScanSnap Manager icon in the notification area located at the far right of
the taskbar changes from
to .
5. Pull out the extension and the stacker on the ADF paper chute (cover).
Example: iX1600
6. Load the documents in the ADF paper chute (cover).
Load the document face-down and head-first with the back facing you (when loading multiple
documents, the last page is on the top). Adjust the number of documents so that they do not
go beyond the reference marks and are kept within the side guides when they are loaded.
Scanning Documents with iX1600 / iX1500 / iX1400
186
To Next Page
Loading...
