Why does the backside of the document appear in the scanned image when scanning a double-sided document with my Fujitsu Scanner?
If the backside of the document appears in the scanned image when scanning a double-sided document, mark the “Setting for text only document” checkbox.
Why are scanned images not displayed on the screen when using Fujitsu ScanSnap S500M?
If scanned images are not displayed on the screen when “Allow automatic blank page removal” is enabled, unmark the “Allow automatic blank page removal” checkbox.
Why are scanned images skewed when using Fujitsu ScanSnap S500M Scanner?
If scanned images are skewed when “Allow automatic image deskew” is enabled, load the document onto the scanner so that the skew angle is less than +/-5 degrees.
General| Scanning Technology | CIS (Contact Image Sensor) |
|---|---|
| Optical Resolution | 600 dpi |
| Connectivity | USB 2.0 |
| Color Depth | 24-bit color |
| Duplex Scanning | Yes |
| Automatic Document Feeder Capacity | 50 sheets |
| Type | Sheetfed Scanner |
| Maximum Document Size | A4 |
| Supported Operating Systems | Mac OS X |
| Software | ScanSnap Manager |
| Power Source | USB powered |
To Next Page
