Settings in BIOS Setup Utility
Exiting B IOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The Tablet PC is rebooted
and the new settings come into effect.
Exit Discarding Changes - Reject changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes .
The settings which were valid w hen BI OS Setup Utility was c alled remain effective.
The BIOS Setup Utility ends and the Tablet PC is re booted.
Load Setup Defaul
ts – load default values
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes .
Discard Changes - Discard Changes without
exiting BIOS Se tup Utility
► To discard the changes you have made, select Discard Changes and Ye s.
The settings in place when BIOS Setup Utility was called remain effective.
You c an now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexittheBIOS Setup Utility with these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save chan ges without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional se ttings in the BIOS Setup Utility.
► If yo u wan t to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes .
Save changes and power off
► To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
70 Fujitsu
To Next Page
Loading...
Need help?
General