13-18
Chapter 13 Settings 12-Lead Examination
Freeze
Edit Abnormal wave* Specify whether or not to print abnormal waves such as
misplacing electrodes or recording failure.
Priority, [Standard]
Print ST* Specify whether to print ST value on the upper right of the
dominant.
Yes, [No]
PAC, PVC Mark* Specify whether or not to print the PAC and PVC mark. [Yes], No
Plot measurement* Specify whether or not to print the point used for the waveform
measurement.
Yes, [No]
Auto Sensitive* Specify the auto sensitivity for the dominant waveform of the
results report.
No, [Chest Leads], All Leads
Results Report 1
Results Report 2
Setup Item Description Setting Range
Check Comment Specify whether or not to include check comment. [Yes], No
Edit Interpretation Specify the method for editing the interpretation section.
Judgment+Interp.: Interpretation is printed when general
judgment+interpretation name+Brugada code exist.
Interp.: Interpretation is printed when interpretation
name+Brugada code exist.
Interp. Title Only: Only the interpretation title is printed.
[Judgment+Interp.],
Interp.,
Interp. Title Only
Brugada Risk Analysis Specify whether or not to include the Brugada risk analysis. Yes, [No]
Brugada Risk Report Specify whether or not to include the Brugada risk report. Yes, [No]
ACS Summary Report Specify the output condition for the ACS summary report.
Always: Always outputs the report regardless of the ACS analysis
result.
Abnormal Finding: Outputs only at abnormal condition.
No: Nothing is outputted.
[Always],
Abnormal Finding,
No
ACS Guide Report Specify the output condition for the ACS guide report.
Always: Always outputs the report regardless of the ACS analysis
result.
Abnormal Finding: Outputs only at abnormal condition.
No: Nothing is outputted.
[Always],
Abnormal Finding,
No
Freeze
Setup Item Description Setting Range
Record Time Specify the waveform recording duration at freeze condition. [1min] 1-5
Save Extension Specify the default of the check box for the save extension of the
full disclosure wave. Auto save is also performed as the save
extension.
Yes, [No]
Freeze/Result Display Specify whether or not to display the freeze/result display.
Same w/Exam. Result: The result display will be according to the
setting under [General>Display>Display Result].
No: Results are not displayed.
Before Wave Report: The result display is displayed before
printing the waveform report.
After Wave Report: The result display is displayed after printing
the waveform report.
[Same w/Exam. Result],
No,
Before Wave Report,
After Wave Report
Save Freeze Analysis Specify whether or not to save each freeze analysis when auto
save function is set.
[Yes], No
Freeze Position Specify the default of the analysis position for displaying the
freeze display.
First, Middle, [Last]
To Next Page
Loading...
