Fukuda DS-8500 - User Manual

Contains critical information before using or installing the product.

Details essential precautions for the safe operation of the equipment.

Provides critical guidelines for the safe installation, use, and after-use of the equipment.

Details precautions related to equipment maintenance and safety checks.

Addresses safety precautions when using the equipment with pacemakers, defibrillators, etc.

Explains safety requirements for connecting external manufacturer equipment.

Provides general safety guidelines for operating the DS-8500 system.

Provides safety guidance and potential issues for SpO2 monitoring.

Highlights safety precautions for Non-Invasive Blood Pressure (NIBP) monitoring.

Details safety measures and considerations for Blood Pressure (BP) monitoring.

Provides guidance on alarm behavior, settings, and potential issues.

Warns about potential burn injury caused by SpO2 sensors and their handling.

Advises on handling electromagnetic interference and potential malfunctions.

Covers essential precautions for safely installing the equipment.

Specifies the environmental conditions for proper equipment operation.

Describes the procedures for constructing the system by connecting various units.

Covers essential steps for connecting power and ensuring proper grounding.

Explains the setup and connection procedures for a wired network system.

Guides the configuration of DS-LAN settings, including Room ID and Bed ID.

Provides important warnings and precautions for DS-LAN network usage.

Covers the setup and connection procedures for wireless telemetry networks.

Covers connecting ventilators for data and alarm monitoring.

Details the connection procedures for SvO2/CCO monitors.

Explains how to input CO2 concentration data from various units.

Covers the input of Bispectral Index (BIS) data from monitors.

Covers the input of transcutaneous blood gas monitor data.

Guides the setup for connecting various external devices.

Guides the configuration of alarm system, parameters, and indicators.

Explains how to register and program user modes for display and alarm configurations.

Covers setup for key lock and password management for system administration.

Lists and describes setup items, their defaults, and backup status.

Details methods for cleaning the equipment's touch panel, housing, and sensors.

Outlines the procedures for daily and periodic maintenance checks.

Lists daily check items, procedures, and criteria for verification.

Details the items, procedures, and criteria for periodic equipment checks.