7-2
Chapter 7 Replacement Parts Disposing the Equipment
The usage period or measurement frequency for each part will be displayed.
2After the part is replaced, press the [Reset] key.
The displayed value will reset.
When resetting, set the rotary switch on the main unit to "C" .
After resetting, return the rotary switch to original position.
For details, please refer to our service representative.
Disposing the Equipment
When disposing of the equipment, accessories, follow the regulations of local authority or
each institution. Do not dispose of as ordinary waste.
When disposing of the battery, separate it from other wastes and contact your nearest
service representative.
If there is risk of infection, dispose of as infectious waste according to the regulations of local
authority or each institution.
To Next Page
Loading...
