Full Gauge Controls FG-HMI 4.3 User Manual

18.MAIN MENU
The Main Menu is accessible by pressing the key for at least 3 seconds when using the Groups, Suction or Discharge keys.ddd
18.1 Functions Settings:
For a complete description of all parameters see chapter 19 - Parameter Table.
2 System
settings
3 Communication
settings
4 Expansion
settings
5 Data
management
6 Restore factory
default
1 Functions
settings
1 Main Menu:
Temperature measurement
unit
Language
Warning sound
(Buzzer)
Enable display
eco mode
Pressure measurement
unit
2.1 System:
Expansion model
address 2
Expansion model
address 3
Expansion model
address 4
Expansion model
address 5
Expansion model
address 1
4.1 Expansions:
Sitrad
RS485-1: Protocol
3.1 Communication:
2 Suction
3 Discharge
4 Alarms
5 Activation in the
event of sensor fault
6 Auxiliary functions
7 Auxiliary functions
8 Maintenance
Time
9 Sensors
10 Analog outputs
11 Refrigerant curves
1 Groups
1.1 Settings:
1 Export recipe
Ctrl. - Pen Drive
2 Import recipe
Ctrl. - Pen Drive
3 Firmware update
5.1 Data Management:
Restore
all settings
to factory
defaults?
43

Full Gauge Controls FG-HMI 4.3 Specifications

General

Brand	Full Gauge Controls
Model	FG-HMI 4.3
Category	Controller
Language	English