Furuno FAR-2807 Series - Page 172

3.2
Box Menu
Box Menu Box Menu
Box Menu
3-7
TRIAL
DYNAMIIC
- OFF>SET>START
STATIC
- OFF>WORK
When STATIC or DYNAMIC mode is
selected in the [Menu] -> 4 -> 4 -> 2,
[TRIAL] box is displayed.
When toggling “TRIAL OFF” to “SET”
in the [TRIAL] box, [CSE] and [SPD]
boxes are displayed.
In TRIAL MANEUVER, the movement
of ARPA targets and the own ship is
simulated. During the execution, the “T”
mark is displayed below the display
area.
CSE (TRIAL) 000.0 to 359.9 deg. Ture
SPD (TRIAL) 00.0 to 99.9 kt
MENU
1 [ECHO], 2 [MARK],
3 [ALARM] --- >>
To access the MAIN menu. YES
TARGET LIST
Displays the list of ARPA and AIS target
data. By clicking the lift button on a
target in the left, the target is selected.
Note:
The sort order is specified on the
[TARGET LIST] box menu.
YES
GZ 1, 2 OFF>WORK>SLEEP
Sets the Guard Zoon; GZ of the ARPA
and AIS. This is also for the setting of an
automatic acquisition area of the ARPA.
For setting the GZ, turn the ARPA on.
- GZ 1:
Sets the GZ range between 3 NM
and 4 NM.
- GZ 2:
A GZ or polygon having 10 points
or less that can be set to anywhere.
Note:
When GZ1 is available, GZ2 can set.
[Menu] -> 4 -> 2, 3
ALARM 1, 2 OFF>WORK>ACK
Sets the Alarm Zoon that is audible and
visual alarms when ships, landmasses,
etc. are inward or outward in a set area.
- ALARM 1:
IMO type radar, sets an Guard alarm a
range between 3 and 6 NM.
Expect to the IMO type radar, sets as
no limit.
- ALARM 2:
Set anywhere.
Note:
When Guard alarm-1 is available,
Guard alarm-2 can set.
[Menu] -> 3 -> 2, 3, 5, and 6 to 9
Cont’d