4.7 Setting of AD-100 or GC-10
4-46
Table 4.7.5 Setting of Baud Rate, Version and Talker Name
Fucntion setting
SW3 setting
NMEA version Baud rate
Note-1
Talker name/Power-off function
OFF 1.5
SW3-#1
ON 2.0
OFF 4,800 bps
SW3-#2
ON 38,400 bps
OFF
AG (Heading/track
Controller (autopilot) general)
SW3-#3
Note-2
ON HE (Heading sensor; gyro/north seeking)
OFF Disable
SW3-#3
Note-3
ON Enable
Note-1 When the output interval is set to 25 ms (SW2-#5)and #6 are set to ON, the Baud rate is fixed at
38,400 bps.
Note-2 In the program Ver-03 and 04, the talker name is set here.
Note-3 In the program Ver-05, the power-off function is set and the talker name is fixed to HE.
To Next Page
Loading...
