Furuno FAR-2807 Series - Page 255

4.9 Selection of NAV DATA Input: [OS POSN]
4-52
Example of LAN connection setting
1. Setting for sharing NAV data from the radar No.1
Table 4.9.4 Sharing the NAV data via radar-1
[OS POSN]
No.1
(NAV data Tx)
No.2
(NAV data Rx)
No.x
(NAV data Rx)
1. NAV AID
(GPS1/GPS2/LAN)
Select GPS data input port
(GPS1/GPS2)
LAN LAN
3. SIO DATA LAN
OUTPUT (ON/OFF)
ON OFF OFF
Fig. 4.9.1 Example of LAN connection-1
2. Setting for sharing the NAV data from INS
This setting is based on the assumption, and NAV data is outputted via [LAN] port from
INS.
Fig. 4.9.2 Example of LAN connection-2
HDG data
HDG data
HDG data
HDG data
NAV(L/L, SPD) data
NAV(L/L, SPD) data
NAV(L/L, SPD) data
No.1 FAR- No.2 FAR-
HUB
LAN
INS
(ECDIS)
xx.xx.xxx S
xxx.xx.xxx E
No.x FAR-
xx.xx.xxx S
xxx.xx.xxx E
xx.xx.xxx S
xxx.xx.xxx E
LAN LAN
LAN
INS Port No.10028
NMEA Port No. 10021
NAV data
NAV data
NAV data
NAV data
HDG data
HDG data
HDG data
NAV(L/L, SPD) data
NAV(L/L, SPD) data
No.1 FAR- No.2 FAR-
HUB
LAN
xx.xx.xxx S
xxx.xx.xxx E
No.x FAR-
xx.xx.xxx S
xxx.xx.xxx E
xx.xx.xxx S
xxx.xx.xxx E
LAN
LAN
INS Port No.10028
NMEA Port No. 10021
NAV data
NAV data
NAV data
Input the HDG data for each radar.
FAR
Input the HDG data for each
radar.
ECDIS
Input the HDG/NAV data.