Furuno FAR-2807 Series - Page 257

4.9 Selection of NAV DATA Input: [OS POSN]
4-54
The setting of TTM OUTPUT and INS shown in the Table below is for running TTM data
over the LAN. It is not the setting for sharing NAV data
Table 4.9.6 Sharing the NAV Data via INS-3
Setting
No.1
(NAV data Tx)
No.1 -> No.2
(No.2: NAV data Rx)
INS -> No.x
(No.x: NAV data Rx)
[OS POSN] -> 1.NAV AID
(GPS1/GPS2/LAN/INS)
Select GPS data
input port
(GPS1/GPS2)
LAN INS
[OS POSN] ->
3.SIO DATA LAN OUTPUT
(ON/OFF)
ON OFF OFF
[INITIALIZE] -> 6 -> 2.TTM
OUTPUT
(OFF/REL/TRUE)
Select
REL or TRUE
Select
REL or TRUE
Select
REL or TRUE
[INITIALIZE] -> 8 -> 5 INS
(OFF/SERIAL/LAN)
LAN LAN LAN