Contents
10
50. Is it possible to make the setting of AIS static information and to send AIS
messages from the FAR?
See page.3-13. .........................................................................................................8-12
51. What are the conditions for the loss of AIS targets? ...............................................8-12
52. Show the symbol marks of the AIS and ARPA.
See the Operator’s Manual of the FAR. ..................................................................8-13
53. How should the setting be made on radar side when the ECDIS is connected?
See page.4-83. .........................................................................................................8-13
54. How to display the BARGE MARK
See page.4-38. .........................................................................................................8-13
55. How to connect the EG-3000
See page.6-49. .........................................................................................................8-14
56. How to set “Video Channel” on the VDR side
See page.4-55 and 4-57. .........................................................................................8-14
57. How to update a program
See Chapter 5. .......................................................................................................8-14
58. What boards can be used commonly for X-band and S-band?
See page.5-2 and 6-37 to 6-39. ...............................................................................8-14
59. What are components needing periodic replacement?
See page.6-42, 6-48 and 2-14. ................................................................................8-14
60. How to determine the power cable size. ..................................................................8-15
61. How to measure the frequency of the X-band radar ................................................8-15
62. Can SC-60/120/50/110 be connected with the IMO-type radar for heading data? ..8-15
63. The trackball of the control unit does not move smoothly. .....................................8-16
64. Proper menu setting is not known. How can the setting be reset to the default?
See page.4-1. ...........................................................................................................8-16
65. Although noise appears on the screen, echoes are not displayed.
See page.6-7. ...........................................................................................................8-16
66. Radar echo alignment is abnormal in azimuth direction.
See page.4-24. .........................................................................................................8-17
67. A message related to a communication error between Processor and TR or
Control unit is displayed in the ALERT box. How can the lines between the units
be checked?
See page.6-2 and 6-31 to 6-36. ...............................................................................8-17
68. The ALERT BOX displays VIDEO error.
See page.4-77 and 6-32. .........................................................................................8-18
69. Give the information on SYSTEM FAIL alarm.
See page.4-58. .........................................................................................................8-18
70. Echoes are reversed left to right on the S-band radar. .............................................8-19
71. How to adjust the Magnetron after being replaced.
See page.6-43. .........................................................................................................8-19
72. Give basic information on radars. ............................................................................8-20
1) Comparison between S-band and X-band ..................................................8-20
2) Range resolution: ........................................................................................8-20
3) Minimum range: .........................................................................................8-20
4) Bearing resolution ......................................................................................8-21
5) Propagation distance (Radar horizon) ........................................................8-21
To Next Page
Loading...
