Introduction
4
12. Connection with ECDIS: See page.4-83.
For related setting, select SERIAL or LAN in the setting of “[Menu] –> 0 -> 8 ->
5: INS”, and select TRUE in the setting of “[Menu] –> 0 -> 6 -> 2: TTM
OUTPUT”. The setting should be made according to the ECDIS connecting port.
The SERIAL setting is the connection with the [TRACK CONTROL] port (J620)
on the TB board and the LAN setting is the connection with the LAN port.
13. Compatibility of RPU-013: See page.4-69 and 6-40.
The RPU-013 can be used commonly for X-band and S-band but uses a different
PWR board according to the ship’s main and antenna revolving speed and a
different HV-TX board according to the output power (12 kW/25 kW and 30 kW).
To Next Page
Loading...
