Furuno TZT16F - Page 47

3. HOW TO SET UP THE EQUIPMENT
3-9
[Initial Setup] menu - [GRAPHIC INSTRUMENTS SETUP]
[GRAPHIC INSTRUMENTS SETUP] - [DEPTH]
[GRAPHIC INSTRUMENTS SETUP] - [SEA SURFACE TEMPERATURE]
[GRAPHIC INSTRUMENT SETUP] - [PROPULSION ENGINE] or [OTHER ENGINE]
Manual Fuel Management
[Remote Controller
Configuration]
When there are multiple units in the NavNet network, the Remote Controller
MCU-004/MCU-005 can select the display to show on the unit with MCU-
004/MCU-005 connection. Further, the cycling order of displays can be set.
See the Operator’s Manual.
[Sirius Radio Diag-
nostic]
Check the satellite radio of the FURUNO BBWX SiriusXM weather receiver
for proper operation. See the Operator’s Manual.
[Sirius Weather Diag-
nostic]
Check the weather section of the FURUNO BBWX SiriusXM weather re-
ceiver for proper operation. See the Operator’s Manual.
[Reset Default Set-
tings]
Reset the system to default settings. [OK], [Cancel]
Menu Item Description Options (setting range)
[Maximum Boat Speed] Set the transducer’s maximum detectable
speed.
1 (kn) to 99 (kn)
[Maximum Wind Speed] Set the transducer’s maximum detectable
speed.
1 (kn) to 99 (kn)
Menu Item Description Options (setting range)
[Minimum Depth] Set the transducer’s minimum detectable
depth.
1 (m) to 1999 (m)
[Maximum Depth] Set the transducer’s maximum detectable
depth.
1 (m) to 2000 (m)
Menu Item Description Options (setting range)
[Minimum Sea Surface
Temperature]
Set the transducer’s minimum detectable
temperature.
0.00°C to 98.99°C
[Maximum Sea Surface
Temperature]
Set the transducer’s maximum detectable
temperature.
0.01°C to 99.99°C
Menu Item Description Options (setting range)
[Max. RPM] Set the maximum rpm of your engine to
show on the RPM display.
1 (rpm) to 20,000 (rpm)
[Red Zone Oil Pressure] Set the starting value for the red zone area
of the oil pressure meter.
0 (psi) to 143 (psi)
[Max. Oil Pressure] Set the maximum oil pressure of your
engine.
1 (psi) to 144 (psi)
[Min. Temperature] Set the minimum temperature for your
engine.
0.00°C to 99.00°C
[Red Zone Temperature] Set the starting value for the red zone area
of the engine temperature indicator.
0.01°C to 999.00°C
Menu item Description Options (setting range)
[Total Fuel Capacity] Enter the total fuel capacity of your
tank(s).
0 to 9,999(L).
Menu item Description Option (setting range)