1-1
1. INSTALLATION
1.1 Requirements
Maintenance Viewer components
Recommended specifications for replay PC
Before you connect a PC to the VDR, set the IP address and subnet mask on the
PC and set the internet options of Internet Explorer
®
.
1.2 How to Install the VDR Maintenance Viewer
The software program for the Maintenance Viewer is included in the accessory CD.
Install the program in the PC as directed in the applicable procedure in this section.
1.2.1 Windows
®
7
Deactivate the firewall
Deactivate the firewall to install and operate the Maintenance Viewer.
1. Click the [Start] button to open the [Control Panel].
2. In the search box, type firewall, and then click [Windows Firewall].
3. In the left pane, click [Turn Windows Firewall on or off].
4. Click [Turn off Windows Firewall] then click [OK].
If you try to use the Maintenance Viewer with the firewall active, VDR settings cannot
be downloaded or updated.
To reactivate the firewall, click [Turn on Windows Firewall] at step 4 in the procedure.
• Software program CD
• LAN cable (supplied)
• Documentation
• CPU: Pentium 350 MHz (or equivalent) or higher
• RAM: Minimum 1 GB
• HDD: Minimum 250 GB
• Screen resolution: XGA or higher (More than SXGA (1280x1024) recommended)
• Operating system: 32 bit Windows
®
7, Windows
®
8*, Windows Vista
®
, Windows
®
XP
Professional SP2. English or Japanese OS only.
*32 or 64 bit.
• CD-ROM drive (internal or external)
• LAN port
• DirectX
®
9.0c or higher
• Java
®
7.25 (If there is no Java
®
in the PC or the Java
®
is outdated, install the Ja-
va
®
program from the accessory CD.)
• Microsoft
®
Visual C++
®
2005 SP1 Redistributable Package (x86)
To Next Page
Loading...
