41
9 Basic Tasks
9.1 Opening & Closing the Doors
The main door and filament door on your F400 have high-friction hinges to help the doors stay open on their own.
When opening the doors, take care not to open them too far, as this can cause them to fall backwards.
When closing the doors, keep your hand on the door all the way to the closed position. Don’t let it go and let it fall
closed.
9.2 Running a Print Job
Preparing for and running a print job can be thought of as 2 separate workflows: one for the physical side where
you set up the printer, and one for the software side where you prepare your 3D model for printing. We’ll cover
them both here.
To Next Page
Loading...