1
Select the setting item by (JOG) button up or down operation,
(Setting the battery type)
Select the "BATT-TYP", and select the mode by pressing the (+)
or (-) button.
"NiMH5 LiFe2" :Futaba rechargeable type battery
"DRY 4CELL" :Dry cell battery (alkaline battery recommended) 4 batteries
(Setting the liquid crystal backlighting mode)
Select the "LCD-BLHT", and select the mode by pressing the (+)
or (-) button.
"KEY-ON" :Fixed time backlighting ON after button operated.
"ALWAYS" :Backlighting always ON
"OFF" :Backlighting OFF
(Setting liquid crystal backlighting time)
Select the "LHT-TIME", and use the (+) and (-) buttons to set
the ON time.
When "KEY-ON" is set at the preceding item, this
ON time becomes effective
.
(Jog button LED mode)
Select the "JOG-BLHT", and use the (+) and (-) buttons to set
the ON time.
"LCD-BLHT" :Link to LCD screen backlight setting
"OFF" :Jog button LED OFF
System function setup
MENU 1
MENU 2
MENU 3
LHT-TIME
LCD-BLHT
BATT-TYP
JOG-BLHT
LED-MODE
BUZ-TONE
CONTRAST
DISP-SEL
2.4G-BND
OPE-TIME
2ND-COND
EPA TRIM
Setting item selection
The items move in the order
shown in the figure above.
Setup items
BATT-TYP :Battery type
LCD-MODE :Backlighting mode
LHT-TIME :Backlighting time
JOG-BLHT
:
Jog button LED mode
CONTRAST :Contrast
BUZ-TONE :Buzzer tone
LED-MODE :LED color
DISP-SEL :Initial screen mode
2ND-COND :2nd condition function
OPE-TIME :Power off forgotten alarm
2.4G-BND :2.4GHz band mode
EPA TRIM :Quick EPA function
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Backlight mode (LCD-BLHT)
KEY-ON, ALWAYS, OFF
Backlighting time (LHT-TIME)
1~30
Initial value: 10
Battery Type (BATT-TYP)
NIMH 5CELL, DRY 4CELL
Jog button LED mode (JOG-BLHT)
LCD-BLHT, OFF
System Functions "SYSTM"
•Select the setting item by
button
*
blinks at the current
setup item.
To Next Page
Loading...
