Rub the puncture site for about 20 seconds before penetration.
Clean the puncture site using cotton moistened with 70%
alcohol and let it air dry.
Fingertip testing (i)
Press the lancing device’s tip firmly against the lower side of your
fingertip. Press the release button to prick your finger, then a
click indicates that the puncture is complete.
NOTE:
Choose a different spot each time you test. Repeated punctures
at the same spot may cause soreness and calluses.
It is recommended that you discard the first drop of blood as it
might contain tissue fluid, which may affect the test result.
11
To Next Page
Loading...
