If you have trouble filling the confirmation window, please
contact your health care professional or the local customer
service for assistance.
5. Read Your Result
The result of the blood glucose test / ß-ketone will appear after the
meter counts down to 0. The blood glucose / ß-ketone test result
will automatically be stored in the memory.
6. Remove the used test strip and lancet (m)
Eject the test strip by pushing the eject button on the side. Use a
sharp bin to dispose of used test strips. The meter will switch
itself off automatically.
Always follow the instructions in the lancing device package
insert when removing the lancet.
WARNING:
․ The used lancet and test strip may be biohazards. Please follow
your healthcare provider’s recommendations for proper disposal.
․ Wash your hands thoroughly with soap and water after handling
the meter, lancing device and test strips to avoid contamination.
For more information, please refer to the “Cleaning and
Disinfection” section.
METER MEMORY
The meter stores the 1000 most recent blood glucose or ß-ketone
test results along with respective dates and times in its memory. To
enter the meter memory, start with the meter switched off.
13
To Next Page
Loading...