TESTING WITH BLOOD SAMPLE
WARNING:
To reduce the chance of infection:
Never share a lancet or the lancing device.
Always use a new, sterile lancet. Lancets are for single use only.
Avoid getting hand lotion, oils, dirt, or debris in or on the
lancets and the lancing device.
Wash and dry your hands thoroughly after handling the
meter, lancing device and test strips to prevent infection. For
more information, please refer to the “Cleaning and
Disinfection” section.
If the meter is being operated by a second person who is providing
testing assistance to the user, the meter and lancing device should be
decontaminated prior to use by the second person.
Sharing the lancing device and lancets may increase the risk of
contracting infectious diseases. Lancing device must not be
used for more than one person.
Preparing the Lancing Device for Blood Testing
Please refer to the manufacturer’s instructions for the lancing device
to collect a blood sample.
Preparing the Puncture Site
Stimulating blood perfusion by rubbing the puncture site before blood
extraction significantly reduces variations between measurements.
Please follow the suggestions below before obtaining a drop of blood:
Wash and dry your hands before starting.
Select the puncture site at fingertips
10
To Next Page
Loading...