DOWNLADING RESULTS TO A COMPUTER
Data transmission via cable
You can use the meter with a strip port cable and the Health Care
Software System to view test results on your personal computer. To
learn more about the Health Care Software System or to obtain a
strip port cable separately, please contact local customer services or
the place of purchase for assistance.
1. Obtaining the required cable and installing the software.
2. To download the Health Care Software System, please visit
the TaiDoc’s website: www.taidoc.com.
3. Connecting to a personal computer
Connect the strip port cable to a cable port on your computer. With
the meter switched off, insert the other end of the strip port cable to
the meter data port. "PC" will appear on the meter display,
indicating that the meter is in communication mode.
4. Data transmission
To transmit data, follow the instructions provided with the
software. Results will be transmitted with date and time. Remove
the cable and the meter will automatically switch off.
WARNING:
While the meter is connecting to the personal computer, it will
be unable to perform a blood glucose / ß-ketone test.
15
To Next Page
Loading...