Color or paint/printing on housing is abnormal
Scratches or abrasions on meter are higher than acceptable
Please contact the customer service for a replacement meter if
any of the signs of deterioration are noticed.
NOTE:
Do NOT clean and disinfect the meter while performing tests.
If the meter is being operated by a second person, the meter and
lancing device should be decontaminated prior to use by the
second person.
Do NOT allow cleaning and disinfecting solution to get in the
test slot, battery compartment, or strip-ejection button.
If you do get moisture in the test strip slot, wipe it away with a
corner of tissue.
Always dry the meter thoroughly before using it
Do not spray the meter directly with cleaning solutions especially
those containing water (i.e. soapy water), as this could cause
the solution to enter the case inside and damage the electronic
components or circuitry
19
To Next Page
Loading...
