Galil Motion Control DMC-40x0 Series User Manual

DMC-40x0 Command Reference DH • 79
DH
FUNCTION: DHCP Enable
DESCRIPTION:
The DH command configures the DHCP or BOOT-P functionality on the controller for Server IP
addressing.
ARGUMENTS: DH n where
n = 0 disables DHCP and enables BOOT-P
n = 1 disables BOOT-P and enables DHCP
n = ? returns the current state of the setting
USAGE: DEFAULTS:
While Moving Yes Default Value 1.0
In a Program Yes Default Format -
Command Line Yes
Controller Usage
DMC-4000
RELATED COMMANDS:
IA IP Address
EXAMPLES:
DH 1 Sets the DHCP function on. IA assignment will no
longer work. IP address cannot be burned.
Controller will receive its IP address from the
DHCP server on the network.
DH 0 Sets the DHCP function off, and the Boot-P
function on.
Note 1: Galil Tools software can assign an IP address to a controller with DH1 enabled in the absence of
a DHCP server.
Note 2: Up to date versions of a smart terminal, WSDK, Set up 32, or DMC OCX32 are required to set an
IP address in the absence of a DHCP server when DH1 is enabled.

Galil Motion Control DMC-40x0 Series Specifications

General

Brand	Galil Motion Control
Model	DMC-40x0 Series
Category	Controller
Language	English