Galil Motion Control DMC-40x0 Series User Manual

186 ● P2CH DMC-40x0 Command Reference
P2CH
FUNCTION: Serial port 2 character
DESCRIPTION:
P2CH returns the last character sent to the auxiliary serial port (port 2)
USAGE: DEFAULTS:
While Moving Yes Default Value -
In a Program Yes Default Format -
Command Line Yes
Controller Usage
ALL CONTROLLERS
RELATED COMMANDS:
P2CD Serial port 2 code
P2NM Serial port 2 number
P2ST Serial port 2 string
CI Configure #COMINT
CC Configure serial port 2
#COMINT Communication interrupt automatic subroutine
EXAMPLES:
:^R^V
DMC4040 Rev 1.0
:^R^S
:CC 9600,0,1,0
:MG "TEST" {P2} ;'send a message to the hand terminal
:MG P2CH {S1} ;'the 6 button was pushed on the hand terminal
6
:

Galil Motion Control DMC-40x0 Series Specifications

General

Brand	Galil Motion Control
Model	DMC-40x0 Series
Category	Controller
Language	English