DMC-40x0 Command Reference @AN[n] • 27
@AN[n]
FUNCTION: Read analog input
DESCRIPTION:
Returns the value of the given analog input in volts
ARGUMENTS: @AN[n] where
n is an unsigned integer in the range 1 to 8
USAGE: DEFAULTS:
While Moving Yes Default Value -
In a Program Yes Default Format -
Command Line Yes
Controller Usage
ALL
RELATED COMMANDS:
AQ Analog Range
@IN[n] Read digital input
@OUT[n] Read digital output
SB Set digital output bit
CB Clear digital output bit
OF Set analog output offset
EXAMPLES:
:MG @AN[1] ;'print analog input 1
1.7883
:x = @AN[1] ;'assign analog input 1 to a variable
To Next Page
Loading...
