Galil Motion Control DMC-40x0 Series - Page 223

DMC-40x0 Command Reference SB • 213
SB
FUNCTION: Set Bit
DESCRIPTION:
The SB command sets one of the output bits.
ARGUMENTS: SB n where
n is an integer which represents a specific controller output bit to be set high (output = 1).
USAGE: DEFAULTS:
While Moving Yes Default Value -
In a Program Yes Default Format -
Command Line Yes
Controller Usage
ALL CONTROLLERS
RELATED COMMAND
CB Clear Bit
EXAMPLES:
SB 5 Set output line 5
SB 1 Set output line 1