Galil Motion Control DMC-40x0 Series

DMC-40x0 Command Reference @SIN[n] • 217
@SIN[n]
FUNCTION: Sine
DESCRIPTION:
Returns the sine of the given angle in degrees
ARGUMENTS: @SIN[n] where
n is a signed number in degrees in the range of -32768 to 32767, with a fractional resolution of 16-
bit..
USAGE: DEFAULTS:
While Moving Yes Default Value -
In a Program Yes Default Format -
Command Line Yes
Controller Usage
ALL
RELATED COMMANDS:
@ASIN[n] Arc sine
@COS[n] Cosine
@ATAN[n] Arc tangent
@ACOS[n] Arc cosine
@TAN[n] Tangent
EXAMPLES:
:MG @SIN[0]
0.0000
:MG @SIN[90]
1.0000
:MG @SIN[180]
0.0000
:MG @SIN[270]
-1.0000
:MG @SIN[360]
0.0000
: