Configuration
Target and user modules (DP-HR-U) · 180
4. Press F8 to select one of the hotkeys listed under Key. The on-screen display can be
opened by pressing the hotkey and the selected hotkey modifier(s) at the same
time:
5. Press F2 to save your settings.
Opening the on-screen display via double keypress
In addition to opening the OSD with the key combination Alt+Num, you can open
the OSD by pressing a previously selected key twice.
How to define the key to open the OSD via double keypress:
1. Press the Alt+Num (default) hotkey to open the on-screen display.
2. Select Hotkey and press Enter.
3. Select OSD via 2x keypress and press F8 (repeatedly) to select one of the following
options:
Num:
Num key
Pause:
Pause key
Insert:
Insert key
Delete:
Delete key
Home:
Home key
End:
End key
PgUp:
Page Up key
PgDn:
Page Down key
Space:
Space key
off:
Opening OSD via double keypress disabled (defaultStandard)
Ctrl:
Open OSD by pressing Ctrl twice
Alt:
Open OSD by pressing Alt twice
Alt Gr:
Open OSD by pressing Alt Gr twice
Win:
Open OSD by pressing Win twice
Shift:
Open OSD by pressing Shift twice
Print:
Open OSD by pressing Druck twice
To Next Page
Loading...
