User module »DP-HR-U-CON-2«
85 · Target and user modules (DP-HR-U)
User module »DP-HR-U-CON-2«
With DP-HR-U-CON-2 user modules, you can connect a console (DisplayPort monitor,
keyboard, mouse and audio devices) to two digital matrix switches of the Control
-
Center-Compact, ControlCenter-Digital or the DVICenter series.
At the installed console, matrix switch users can access a target module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active target
module with up to 16 Mbit/s (
DVI-U-CPU, DP-U-CPU, DP-HR-U-CPU and VGA-U-CPU series
only).
The buttons on the front panel of the user module or configured key combinations
(select keys) let users switch between the connected matrix switches.
Package contents
1 × DP-HR-U-CON-2 user module
1 × Power cable
1 × EasyStart flyer
1 × »Safety instructions« flyer
Required accessories
2 × Category 5e (or better) twisted pair cables to connect the user module to two
the matrix switches
ADVICE:
Instead of a matrix switch, you can also connect a compatible target module
to each of the two channels.
To Next Page
Loading...
Need help?
General
