G&D DP-HR-CPU - Page 187

Configuration
Target and user modules (DP-HR-U) · 182
How to transmit the EDID profile of the connected monitor to the target module:
1. Press the Alt+Num (default) hotkey to open the on-screen display.
2. Select EDID and press Enter.
3. Select Send monitor‘s EDID and press Enter.
4. Press Esc to close the EDID menu.
How to activate the G&D EDID profile:
1. Press the Alt+Num (default) hotkey to open the on-screen display.
2. Select EDID and press Enter.
3. Select Install default EDID and press Enter.
4. Press Esc to close the EDID menu.
Activating the support of special PS/2 keyboards
The user module supports the additional keys of the follwoing PS/2 keyboards:
PixelPower Rapid Action, PixelPower Clarity (blue) and SKIDATA1.
How to activate the support of special PS/2 keyboards:
1. Press the Alt+Num (default) hotkey to open the on-screen display.
2. Select Keyboard/Mouse and press Enter.
3. Select PS/2 Enh. keyboard and press F8 to select one of the following options:
4. Press F2 to save your settings.
NOTE: By activating this profile, you might delete a transmitted EDID profile.
no:
Standard keyboard
PixelPower RA:
Special PixelPower Clarity (blue) keyboard
PixelPower C:
Special PixelPower Rapid Action keyboard
SKIDATA1:
Special SKIDATA1 keyboard
ADVICE: Press Ctrl+F8 to show a list inclduing all options. Select the desired
option and press
Enter.