GARDASOFT RT 20 Series - Page 40

RTxxx LEDlighting controllers - User Manual
The channel you want to set up is displayed.
Press the
SEL
button.
Use the
p
and
q
buttons to select
SPu
and
press the
SEL
button.
bri
is displayed. Press the
SEL
button to set
the lighting intensity.
Use the p and qbuttons to set the lighting
intensity from 1% to 999%. Press the
SEL
button.
dEL is displayed. Press the SEL button to set
up the delay time as described in Section 9.7,
Setting time periods.
Press the SELbutton.
— 40 —