WARRANTY
ROTARY SCREW COMPRESSORS
OIL INJECTED - OIL FREE
GENERAL PROVISIONS AND LIMITATIONS
Gardner Denver Machinery Inc. (the “Company”) warrants
to each original retail purchaser (“Purchaser”) of its new
products from the Company or its authorized distributor that
such products are, at the time of delivery to the Purchaser,
made with good material and workmanship. No warranty
is made with respect to:
1.
2.
3.
4.
5.
Any product which has been repaired or altered in
such a way, in the Company’s judgment, as to affect
the product adversely.
Any product which has, in the Company’s judgment,
been subject to negligence, accident, improper
storage, or improper installation or application.
Any product which has not been operated or
maintained in accordance with the recommendations
of the Company.
Components or accessories manufactured, warranted
and serviced by others.
Any reconditioned or prior owned product.
Claims for items described in (4) above should be submitted
directly to the manufacturer.
WARRANTY PERIOD
The Company’s obligation under this warranty is limited
to repairing or, at its option, replacing, during normal
business hours at an authorized service facility of the
Company, any part which in its judgment proved not to
be as warranted within the applicable Warranty Period as
follows.
COMPRESSOR AIR ENDS
Compressor air ends, consisting of all parts within and
including the compressor cylinder and gear housing, are
warranted for 24 months from date of initial use or27 months
from date of shipment to the first purchaser, whichever
occurs first.
Any disassembly or partial disassembly of the air end, or
failure to return the “unopened” air end per Company
instructions, will be cause for denial of warranty.
OTHER COMPONENTS
All other components are warranted for 12 months from
date of initial use or 15 months from date of shipment to
first purchaser, whichever occurs first.
LABORTRANSPORTATIONAND INSPECTION
The Company will provide labor, by Company representative
or authorized service personnel,
for repair or replacement
of any product or part thereof which in the Company’s
judgment is proved not to be as warranted. Labor shall
be limited to the amount specified in the Company’s labor
rate schedule.
Labor costs in excess of the Company rate schedules
caused by, but not limited to, location or inaccessibility of
the equipment, or labor provided by unauthorized service
personnel is not provided by this warranty.
All costs of transportation of product or parts claimed not
to be as warranted and, of repaired or replacement parts
to or from such service facility shall be borne by the
Purchaser. The Company may require the return of any
part claimed not to be as warranted to one of its facilities
as designated by Company, transportation prepaid by
Purchaser, to establish a claim under this warranty.
Replacement parts provided under the terms of this warranty
are warranted for the remainder of the Warranty Period
of the product upon which installed to the same extent as
if such parts were original components.
WARRANTY REGISTRATION VALIDATION
A warranty registration form is provided with each machine.
The form must be completed by the Purchaser and mailed
within ten days after machine start-up to validate the
warranty.
DISCLAIMER
THE FOREGOING WARRANTY IS EXCLUSIVE AND IT
IS EXPRESSLY AGREED THAT, EXCEPT AS TO TITLE,
THE COMPANY MAKES NO OTHER WARRANTIES,
EXPRESSED, IMPLIED OR STATUTORY, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY.
THE REMEDY PROVIDED UNDER THIS WARRANTY
SHALL BE THE SOLE, EXCLUSIVE AND ONLY REMEDY
AVAILABLE TO THE PURCHASER AND IN NO CASE
SHALL THE COMPANY BE SUBJECT TO ANY OTHER
OBLIGATIONS OR LIABILITIES. UNDER NO
CIRCUMSTANCES SHALL THE COMPANY BE LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, EXPENSES, LOSSES OR
DELAYS HOWSOEVER CAUSED.
No statement, representation, agreement or understanding,
oral or written, made by any agent, distributor,
representative, or employee of the Company which is not
contained in this Warranty will be binding upon the Company
unless made in writing and executed by an officer of the
Company.
This warranty shall not be effective as to any claim which
is not presented within 30 days after the date upon which
the product is claimed not to have been as warranted. Any
action for breach of this warranty must be commenced within
one year after the date upon which the cause of action
occurred.
Any adjustment made pursuant to this warranty shall not
be construed as an admission by the Company that any
product was not as warranted.
AU-20 R 1/94
To Previous Page
Loading...
Need help?
General
