Page 84
6) Press NO. The display will show:-
7) Press YES. The display will show for example:-
8) Press YES. The display will show for example:-
9) Press YES. The display will show for example:-
10) Press YES. The display will show for example:-
11) If no Novagard Active Sounders are fitted/programmed
the display will return to step 5
Or
If at least one Novagard Active Sounder is fitted/
programmed the display will show:-
12) Press the number of the Novagard Active you
wish to test. The display will show:-
13) Press YES. The display will show:-
Then:-
00 = No Tamper 01 = Front Tamper
02 = Rear Tamper 03 = Front & Rear Tamper
Change / List
Diagnostics ?
Battery Test
= 01 Hrs
Aux. Volts
13.6
Battery Volts
On Charge 13.0V
Battery Volts
Off Charge 12.8V
Select NovActive
1 - 8
Refresh Data ?
Please WAIT
Fault Status =
00
GardTec 872
Miscellaneous
To Next Page
Loading...
