Garmin EDGE 705 - Go for a Ride

Edge 605/705 Owner’s Manual 9
GettinG Started
2. Select a bike prole. You can
set up to three proles.
3. Enter your bike information.
4. (Edge 705 only) If you have a
GSC 10
speed and cadence
sensor, select the Cadence
check box. If you have a third-
party power meter, select the
Power check box. For more
accessory information, see
pages 34–41.
5. In the
Wheel Size eld, select
Auto to have the GSC 10
automatically detect your tire
size using GPS data, or select
Custom to enter your wheel
size. For a table of sizes and
circumferences, see page 62.
Step 8: Go for a Ride!
1. Press mode to view the bike
computer page.
2. Press
start to start the timer.
3. After completing your ride,
press stop.
4. Press and hold
lap/reset to
save your ride data and reset
the timer.
Step 9: Download Free
Software
1. Go to www.garmin.com/edge.
2. Follow the on-screen
instructions to download
Garmin Training Center or
Garmin Connect.