Garmin EDGE 705 - Ant+Sport; Accessories; Receive and Transfer Data

Edge 605/705 Owner’s Manual 57
SettinGS
ANT+Sport
Press menu > select Settings >
ANT+Sport.
Accessories
If you purchased a sensor (with
ANT+Sport wireless technology)
separately, you need to pair it with
your Edge.
What Is Pairing?
Pairing is the connecting of sensors,
such as your heart rate monitor
with your Edge. After you pair the
rst time, your Edge automatically
recognizes your sensor each time
it is activated. This process occurs
automatically when you turn on the
Edge and only takes a few seconds
when the sensors are activated and
functioning correctly. When paired,
your Edge only receives data from
your sensor, and you can go near
other sensors.
To pair accessories:
1. Move away (10 m) from other
sensors while the Edge is
trying to pair with your sensor
for the rst time. Bring your
sensor within range (3 m) of
the Edge.
2. Press
menu > select Settings
> ANT+Sport.
3. For each accessory you have,
select Yes > Restart Scan.

NOTE: For information
about using accessories,
zones, and calibration, see
pages 34-41.
Receive and Transfer Data
See Data Management on page 44.