Garmin Forerunner 310XT - Power Meter

Forerunner 310XT Owner’s Manual 39
Using Accessories
Press mode > select Settings > Run
Settings > Foot Pod > Calibration
Factor. Adjust the calibration factor.
Increase the calibration factor if your
distance is too low; decrease the
calibration factor if your distance is
too high.
Bike Details
To enter information specic to
your bike in order to calibrate your
sensors more accurately, complete
the following steps:
1. Press and hold mode to select
the bike sport mode.
2. Press
mode > Settings > Bike
Settings > bike name > Bike
Details.
3. Modify the information in the
Name, Weight, and Odometer
elds.
4. You can select custom in the
Wheel Size eld to manually enter
your wheel size.
NOTE: The automatic default in
the Wheel size eld, calculates
your wheel size automatically
using GPS distance.
Power Meter
For a list of compatible third-party
power meters, go to www.garmin
.com.
Power Calibration
1. Press mode > select Settings
> Bike Settings > bike name >
ANT+Power .
2. Select
�es in the Power Meter
Present? eld.
3. Select
Calibrate.
For calibration instructions specic
to your power meter, refer to the
manufacturer’s instructions.