Garmin GTN 625Xi User Manual

2-68 Pilot’s Guide 190-02327-03 Rev. C
Get Started
ILS CDI Capture
FEATURE LIMITATIONS
Automatic switching is not available for aircraft equipped with a KAP 140/KFC 225 autopilot.
Startup Page
Page Options:
• Charts
1
• Connext Weather • DALT/TAS/Winds • Default NAV
2
• Emergency • FIS-B Weather • Flight Plan • Flight Timers • Fuel Planning
• Home (default) • Map • Nearest Airport • Procedure • Radar • Sirius XM
• Stormscope • Terrain • Traffic • Trip Planning • VCALC • VNAV
• Waypoint Info - Airport • Waypoint Info - VOR • Weather
1
GTN 750 Xi Series only.
2
GTN 650 Xi Series only.
Auto Switch Manual Selection
GTN Xi automatically switches the
external CDI from GPS to VLOC
on ILS approach.
Allows you to manually switch
the external CDI connection
using the CDI key.
For more about ILS approaches, refer to the Procedures section.
Tapping this key sets the manner in which ILS CDI
capture occurs: automatically or manually
This function may not be available in certain
installations.
Customize the default display page. This option
resides in the System Setup app.
Tap Startup Page and select from the menu of
available page options.
WHERE TO FIND IT
System
Setup
Home

Garmin GTN 625Xi Specifications

General

Brand	Garmin
Model	GTN 625Xi
Category	GPS
Language	English