Garmin GTN 625Xi User Manual

3-124 Pilot’s Guide 190-02327-03 Rev. C
Navigation
Departures
FEATURE LIMITATIONS
• Vector-only departures may be excluded from some databases
PAGE SPECIFIC CONTROLS
Load Departure: Loads departure procedure into the active flight plan.
SELECT A DEPARTURE
From the Home page:
1. Tap PROC > Departure.
2. Confirm the selected airport. If necessary, tap Airport and choose an airport
using the provided search options.
3. Tap Departure and select a departure from the list.
4. Tap Transition and select a transition.
5. Tap Runway and select a runway.
6
. Tap Preview, then review the departure diagram and sequence list.
7. Tap Load Departure, then scroll the flight plan to view all departure waypoints.
To change the departure:
Tap the existing flight plan departure and select a different one.
Flight Plan Departure Options
Loading a Departure into Flight Plan
• Flight plans allow only one departure procedure at a time
• Loading a departure when one is already present will replace the existing entry
• Selecting a departure, transition waypoint, and runway defines the route
If the selected runway displays a “B,” such as “RW10B,” this means the selected
runway is both 10L and 10R.
ViewCharts
DepartureOptions
RemoveDeparture
SelectDeparture
Selecting a departure on the flight plan opens
a menu. Changes to the active flight plan take
effect immediately.
• View chart for selected departure
• Select a new departure
• Remove the selected departure from the
flight plan

Garmin GTN 625Xi Specifications

General

Brand	Garmin
Model	GTN 625Xi
Category	GPS
Language	English